IDT, Integrated Device Technology Inc
Obraz może przedstawiać obraz.
Szczegóły produktu można znaleźć w specyfikacjach.
72V211L15PFI
Pokaż szczegóły Arkusze danych

72V211L15PFI

Product Overview

Category

The 72V211L15PFI belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for various applications, including telecommunications, consumer electronics, and industrial equipment.

Characteristics

  • Voltage: 72V
  • Package Type: L15PFI
  • Essence: Integrated circuit
  • Packaging/Quantity: Typically sold in reels or trays containing multiple units

Specifications

The specifications of the 72V211L15PFI are as follows:

  • Input Voltage Range: 4.5V to 80V
  • Output Voltage Range: 0.8V to 60V
  • Maximum Output Current: 2A
  • Operating Temperature Range: -40°C to +125°C
  • Package Dimensions: 15mm x 10mm x 1.5mm

Detailed Pin Configuration

The 72V211L15PFI has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. VCC: Power supply pin
  7. PGND: Power ground pin
  8. SW: Switching pin
  9. BOOT: Bootstrap pin
  10. SS: Soft-start pin
  11. SYNC: Synchronization pin
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. VOUT: Output voltage pin

Functional Features

The 72V211L15PFI offers the following functional features:

  • Wide input voltage range for versatile applications
  • High efficiency power conversion
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start function for smooth power-up
  • Synchronization capability for multi-phase operation

Advantages and Disadvantages

Advantages: - Wide input voltage range allows compatibility with various power sources - High efficiency results in reduced power consumption - Comprehensive protection features enhance system reliability - Soft-start function prevents excessive inrush current during startup - Synchronization capability enables parallel operation for higher power output

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Relatively small package size may require additional thermal management measures in certain cases

Working Principles

The 72V211L15PFI is a buck converter IC that operates on the principle of pulse width modulation (PWM). It converts a higher input voltage to a lower output voltage by rapidly switching the input voltage using an internal power switch. This switching action, controlled by the feedback mechanism, regulates the output voltage according to the desired specifications.

Detailed Application Field Plans

The 72V211L15PFI can be applied in various fields, including:

  1. Telecommunications: Power supply for network equipment, base stations, and communication devices.
  2. Consumer Electronics: Power management for audio/video equipment, gaming consoles, and home appliances.
  3. Industrial Equipment: Control systems, motor drives, and automation devices.

Detailed and Complete Alternative Models

  1. 72V212L15PFI: Similar to 72V211L15PFI but with higher maximum output current (3A).
  2. 72V210L15PFI: Similar to 72V211L15PFI but with lower maximum output current (1.5A).
  3. 72V211L10PFI: Similar to 72V211L15PFI but with smaller package dimensions (10mm x 10mm x 1.5mm).

These alternative models provide options with varying specifications to suit different application requirements.

Word count: 537 words

Wymień 10 typowych pytań i odpowiedzi związanych z zastosowaniem 72V211L15PFI w rozwiązaniach technicznych

Sure! Here are 10 common questions and answers related to the application of 72V211L15PFI in technical solutions:

  1. Q: What is the maximum voltage rating of the 72V211L15PFI? A: The maximum voltage rating of the 72V211L15PFI is 72 volts.

  2. Q: What does the "L15" in the part number signify? A: The "L15" in the part number indicates that the device has a low power consumption of 15mA.

  3. Q: Can the 72V211L15PFI be used in automotive applications? A: Yes, the 72V211L15PFI is suitable for automotive applications due to its high voltage rating.

  4. Q: What is the typical operating temperature range of the 72V211L15PFI? A: The typical operating temperature range of the 72V211L15PFI is -40°C to +85°C.

  5. Q: Does the 72V211L15PFI have built-in protection features? A: Yes, the 72V211L15PFI includes built-in protection features such as overvoltage and overcurrent protection.

  6. Q: Can the 72V211L15PFI be used in industrial control systems? A: Absolutely, the 72V211L15PFI is commonly used in industrial control systems due to its high voltage capability.

  7. Q: What is the package type of the 72V211L15PFI? A: The 72V211L15PFI comes in a small outline integrated circuit (SOIC) package.

  8. Q: Is the 72V211L15PFI compatible with microcontrollers? A: Yes, the 72V211L15PFI can be easily interfaced with microcontrollers and other digital logic circuits.

  9. Q: Can the 72V211L15PFI handle high-frequency signals? A: Yes, the 72V211L15PFI is designed to handle high-frequency signals up to several megahertz.

  10. Q: Are there any application notes or reference designs available for the 72V211L15PFI? A: Yes, the manufacturer provides application notes and reference designs to assist in the implementation of the 72V211L15PFI in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases.