QD Devices Inc.
Obraz może przedstawiać obraz.
Szczegóły produktu można znaleźć w specyfikacjach.
AD8217BRMZ-RL
Pokaż szczegóły Arkusze danych

AD8217BRMZ-RL

Product Overview

Category

AD8217BRMZ-RL belongs to the category of integrated circuit (IC) amplifiers.

Use

The AD8217BRMZ-RL is primarily used for current sensing and monitoring applications.

Characteristics

  • High accuracy and precision in current measurement.
  • Wide input voltage range.
  • Low power consumption.
  • Small form factor.
  • High common-mode rejection ratio (CMRR).
  • High bandwidth.

Package

AD8217BRMZ-RL is available in a small outline package (MSOP) with 8 pins.

Essence

The essence of AD8217BRMZ-RL lies in its ability to accurately measure and monitor current in various applications.

Packaging/Quantity

AD8217BRMZ-RL is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Input Current Range: ±50A
  • Gain Error: ±0.5%
  • Offset Voltage: ±100µV
  • Bandwidth: 200kHz
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The AD8217BRMZ-RL has the following pin configuration:

  1. VOUT: Output voltage
  2. GND: Ground
  3. IN+: Positive current input
  4. IN-: Negative current input
  5. VS: Supply voltage
  6. NC: No connection
  7. NC: No connection
  8. VREF: Reference voltage

Functional Features

  • Accurate current sensing and monitoring.
  • High linearity and low distortion.
  • Overcurrent detection and protection.
  • Wide operating voltage range.
  • Low power consumption.
  • High immunity to electromagnetic interference (EMI).

Advantages

  • High accuracy and precision in current measurement.
  • Wide input voltage range allows for versatile applications.
  • Small form factor enables space-saving designs.
  • Low power consumption prolongs battery life in portable devices.
  • High common-mode rejection ratio minimizes noise interference.
  • High bandwidth ensures fast response time.

Disadvantages

  • Limited input current range of ±50A may not be suitable for high-current applications.
  • Requires external components for proper operation.
  • Sensitive to temperature variations, requiring careful thermal management.

Working Principles

AD8217BRMZ-RL operates based on the principle of Hall effect. It utilizes a Hall sensor to measure the magnetic field generated by the current flowing through a conductor. This magnetic field is then converted into a proportional voltage output, which can be accurately measured and monitored.

Detailed Application Field Plans

The AD8217BRMZ-RL finds application in various fields, including:

  1. Power management systems
  2. Motor control systems
  3. Battery monitoring systems
  4. Current sensing in industrial equipment
  5. Energy monitoring and metering systems
  6. Overcurrent protection circuits
  7. Automotive electronics

Detailed and Complete Alternative Models

  1. ACS712: Similar current sensor IC with different specifications.
  2. INA219: Integrated current and voltage monitor with higher accuracy.
  3. MAX4376: Precision high-side current-sense amplifier with adjustable gain.
  4. LT6105: High-side current sense amplifier with wide input voltage range.

These alternative models offer similar functionality and can be considered as alternatives to AD8217BRMZ-RL depending on specific requirements.

In conclusion, the AD8217BRMZ-RL is a highly accurate and versatile current sensing IC. Its small form factor, wide input voltage range, and high precision make it suitable for a wide range of applications. However, its limited input current range and sensitivity to temperature variations should be taken into consideration.

Wymień 10 typowych pytań i odpowiedzi związanych z zastosowaniem AD8217BRMZ-RL w rozwiązaniach technicznych

Sure! Here are 10 common questions and answers related to the application of AD8217BRMZ-RL in technical solutions:

  1. Q: What is the AD8217BRMZ-RL? A: The AD8217BRMZ-RL is a high-voltage, bidirectional current shunt monitor that can accurately measure current flowing in both directions.

  2. Q: What is the operating voltage range of the AD8217BRMZ-RL? A: The AD8217BRMZ-RL operates from a single power supply voltage ranging from 2.7V to 5.5V.

  3. Q: What is the typical accuracy of the AD8217BRMZ-RL? A: The AD8217BRMZ-RL has a typical accuracy of ±0.5% over the temperature range of -40°C to +125°C.

  4. Q: Can the AD8217BRMZ-RL measure AC currents? A: Yes, the AD8217BRMZ-RL can measure both DC and AC currents up to a frequency of 100 kHz.

  5. Q: How does the AD8217BRMZ-RL communicate with a microcontroller or other devices? A: The AD8217BRMZ-RL provides an analog output voltage that can be directly interfaced with an ADC or microcontroller for further processing.

  6. Q: Does the AD8217BRMZ-RL require external calibration? A: No, the AD8217BRMZ-RL is factory calibrated and does not require any external calibration.

  7. Q: Can the AD8217BRMZ-RL handle high common-mode voltages? A: Yes, the AD8217BRMZ-RL can handle common-mode voltages up to ±65V, making it suitable for high-voltage applications.

  8. Q: What is the maximum current range that the AD8217BRMZ-RL can measure? A: The AD8217BRMZ-RL can measure currents up to ±3.5A with a full-scale voltage drop of 500mV.

  9. Q: Is the AD8217BRMZ-RL suitable for battery-powered applications? A: Yes, the low power consumption and wide operating voltage range make the AD8217BRMZ-RL suitable for battery-powered applications.

  10. Q: Can the AD8217BRMZ-RL be used in automotive applications? A: Yes, the AD8217BRMZ-RL is automotive qualified and can be used in various automotive systems such as battery management, motor control, and power monitoring.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.